pinta Elastomer foil
For air- and water-tight window and facade joints on the exterior, according to EnEV (energy saving regulations)
The pinta elastomer foil permanently enables the installing of air- and water-tight expansion joints on windows and facades according to the requirements of the EnEV (energy saving regulations), without losing any of its essential permanent elasticity.
The pinta elastomer foil is applied on the exterior and is water vapour permeable.
Areas of application
Window and door sealing on the exterior
Colour / Delivery form
The quality of the sheets is safeguarded according to DIN EN 13859-2
Ozone and UV resistant
compatible with bitumen
neutral behaviour towards most ordinary construction material
unaffected by a multitude of chemical and mechanical influences
to seal brickwork according to DIN 18195-4
complete environmental compatibility
highly ageing resistant
no additional mechanic fixation necessary (Guidelines for the bonding techniques must be observed)
Storable vertically in unopened original packaging for 12 months. Keep out of direct sunlight, store dry and cool.
The material is not to be installed under tension. A tension-free installation needs to be observed. Material and surface should be clean, dry and free of oils, fat and release agents. Please observe the guidelines of the bonding materials strictly. Should lubricants be used to install piping foils, freeing the surfaces completely of release agents before the subsequent bonding is essential. The appropriate use and suitability should be tested through sufficient test-bonding before installation.
Requests / Offers / Orders
Click here E-Mail or call +49 (0) 5722 8936 - 0.